您当前所在位置:首页>产品展示>详细介绍
产品展示
光栅调谐型（超脉冲）二氧化碳激光器
点击次数：157 发布时间：2020/12/24 10:43:39
公司名称：上海非利加实业有限公司
型 号：MERIT-G（GP）
生产地址：中国大陆
已获点击：157
简单介绍：
详细内容
MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges.
MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges.
MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges.
MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges.
MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges.
MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges.
v MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
v MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges.
MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges. MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges.
MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges.
MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges. MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges. MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges. MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品介绍
功率: 在强谱线处连续功率2W（MERIT-GP，峰值功率8W）
波长: 9.2μm - 10.8μm
谱线数：50条以上（MERIT-GP，55条以上）
功率稳定度: ±5%典型值，对于强谱线
激光模式: 近 TEM00, M2 < 1.2，光腰直径2.4mm，全发散角5.5mrad
尺寸: 406×104×71（mm）
冷却要求: 强制空冷
电源: 28VDC/5A（MERIT-GP，48VDC/4A）
可用选件:
固定单波长
闭环控制功率稳定性,±3%
水冷
冷板冷却
实时功率取样
同位素气体填充获得不同的波长范围
产品参数
GRATING TUNED CO2 LASER
SPECIFICATIONS*
Model Merit-G (standard) Merit-GP (Super pulsed)
Output Power 2 watt CW at the strongest line 6 watt peak at the strongest line (200 μs pulse
at 1 kHz)
Number of lines At least 50 At least 55
Power requirement 28 VDC, 7 amps 48 VDC, 4 amps
Range of wavelength: 9.2 μm to 10.8 μm.
Power stability: ±5% Typical for the strong lines
Laser mode: TEM00, M2 < 1.2; beam diameter at
exit: 2.4 mm; beam divergence angle: 5.5 mrad
Dimensions: 16” x 4.1” x 2.8”
Cooling requirement: forced air
Factory warranty: One year for parts ａnd labor due to manufacturing quality
Options available:
• Single fixed wavelength (factory preset)
• Power stabilization with closed loop control, ±3%
• Water cooling
• Cold plate cooling
• Isoe gas fill for different wavelength range
∗ We strive to satisfy custom requirements. Please contact us if you have other special needs.
∗ Specifications subject to change without notice.
∗ Other tunable laser available at lower or higher power levels ａnd different tuning ranges.
更新时间：2024/4/19 11:52:20
标签：MERIT-G（GP）光栅调谐型（超脉冲）二氧化碳激光器
产品询价
| 留言框 | |
| 感兴趣的产品： | * |
| 您的单位： | * |
| 您的姓名： | * |
| 联系电话： | * |
| 详细地址： | |
| 常用邮箱： | |
|
您的任何要求、意见或建议： * |
|
| 验证码： |
*
|
上海非利加实业有限公司联系人：蒲经理
邮箱：2565589524@qq.com 邮编：
同类相关产品
-
SUMO单频激光器
-
FP 2330nm激光管 （Fabry Perot）
-
TLB-6300Velocity TM可调谐激光器
-
220单频光纤激光器
-
NL301G立陶宛EKSPLA 激光器
-
美国Crystal Technology声光调制器
-
CPS198美国Thorlabs二管激光器
-
C00105德国Lumics 1064nm单模激光器
-
美国Terahertz Technologies Inc 公司 C&L波段可调谐激光器
-
瑞士EXALOS公司超辐射发光二管(SLEDs)
-
法国Horus Laser S.A.S公司HLH系列高电压纳脉冲发生器
-
俄罗斯superlum公司 半导体光放大器（SOA）可调谐激光器用SOA
相关文献
产品搜索
- 联系电话：400-006-7520
联系我们
- 公司名称：上海非利加实业有限公司
- 电话：400-006-7520
- Email：2565589524@qq.com
- 联系人：蒲经理
- 手机:18221374310
- QQ: 2565589524
- 公司地址：上海市浦东新区建韵路500号天纳商汇4座1715
技术支持：阿仪网 总访问量：1376412
