您当前所在位置:首页>产品展示>详细介绍
产品展示
英国Cussons发动机空气质量流量计算机
点击次数:150 发布时间:2021/1/6 11:18:34
公司名称:上海非利加实业有限公司
型 号:P7028
生产地址:中国大陆
已获点击:150
简单介绍:
详细内容
英国Cussons发动机空气质量流量计算机P7028
产品介绍
The Mass Flow Computer P7028 is used in conjunction with Cussons Laminar Flow Meters (LFM) for the measurement of air flow in automotive applications.
The instrument uses two precision pressure transducers to measure the differential pressure across the laminar flow element (LFE), and absolute pressure upon discharge from the LFE, and a platinum resistance thermometer to measure the air temperature.
From these measurements a 16 bit microprocessor calculates:-
The volume flow rate at the prevailing temperature and pressure
The volume flow rate corrected to standard conditions (Temperature 15ºC; pressure 1013.08 mbar)
The mass flow rate
The microprocessor automatically corrects the flow rates to take account of changes in the viscosity of air with varying temperature.
The three primary measurements and the three calculated flow rates may be independently displayed in engineering units on a 4 digit LED display by means of six push button selection switches mounted on the instrument front panel.
An analogue output is provided to enable logging of either the mass flow rate or the corrected volume flow rate.
The instrument is designed for use with either one or two LFMs with the latter option enabling the following application to be achieved.
Where the air flow to be measured exceeds the range of available LFMs, a system using 2 LFMs in parallel, as illustrated in Fig. 1, can be used to solve the problem.
Where optimum resolution is required over a wide range of air flow rates, a system using selected LFMs in parallel, as illustrated by Fig. 2, can be used to produce an exceptionally large turn-down ratio. The instrument
provides for either manual or automatic change-over between the two LFMs.
For large engine applications involving two separate air intakes, individual LFMs can be used for each intake as illustrated by Fig. 3. Similarly, one P7028 instrument can be used in conjunction with two LFMs operating in adjacent test cells.
An LFM Change-over Module is available as an accessory for use in dual LFM applications.
产品参数
Standard 3u 19" rack for mounting in 19" cabinet. Optionalenclosure P7030 available for free standing use.
FRONT PANEL
Fitted with:-
illuminated push-button switches for display of measured variables; differential pressure (mmH2O), absolute exit pressure (mbar), and exit temperature.
illuminated push-button switches for display of computed results: volume flow rate (litres/sec), volume flow rate corrected to standard conditions (litres/sec), and mass flow rate (g/s).
Note: The standard conditions referred to are pressure of 1 atmosphere (1013.08 mbar) and temperature of 15ºC.
Four digit seven segment numeric display, 14.2 mm high. Minus sign, segmented display of engineering units. Updated every 250ms approximately.
Autoranging where appropriate.
illuminated push-button switches for selection of LFM.
Illuminated push-button switch for power on/off.
DISPLAY FULL SCALE RESOLUTION
Differential Pressure 0-300 mm H2O 0.5 mm
Absolute Pressure 0-3500 mbar 2 mbar
Temperature 0-100ºC 0.1º
产品简介
详细内容英国Cussons发动机空气质量流量计算机P7028产品介绍TheMassFlowComputerP7028isusedinconjunctionwithCussonsLaminarFlowMeters(LFM)forthemeasurementofairflowinautomotiveapplications
详细介绍
详细内容
英国Cussons发动机空气质量流量计算机P7028
产品介绍
The Mass Flow Computer P7028 is used in conjunction with Cussons Laminar Flow Meters (LFM) for the measurement of air flow in automotive applications.
The instrument uses two precision pressure transducers to measure the differential pressure across the laminar flow element (LFE), and absolute pressure upon discharge from the LFE, and a platinum resistance thermometer to measure the air temperature.
From these measurements a 16 bit microprocessor calculates:-
The volume flow rate at the prevailing temperature and pressure
The volume flow rate corrected to standard conditions (Temperature 15ºC; pressure 1013.08 mbar)
The mass flow rate
The microprocessor automatically corrects the flow rates to take account of changes in the viscosity of air with varying temperature.
The three primary measurements and the three calculated flow rates may be independently displayed in engineering units on a 4 digit LED display by means of six push button selection switches mounted on the instrument front panel.
An analogue output is provided to enable logging of either the mass flow rate or the corrected volume flow rate.
The instrument is designed for use with either one or two LFMs with the latter option enabling the following application to be achieved.
Where the air flow to be measured exceeds the range of available LFMs, a system using 2 LFMs in parallel, as illustrated in Fig. 1, can be used to solve the problem.
Where optimum resolution is required over a wide range of air flow rates, a system using selected LFMs in parallel, as illustrated by Fig. 2, can be used to produce an exceptionally large turn-down ratio. The instrument
provides for either manual or automatic change-over between the two LFMs.
For large engine applications involving two separate air intakes, individual LFMs can be used for each intake as illustrated by Fig. 3. Similarly, one P7028 instrument can be used in conjunction with two LFMs operating in adjacent test cells.
An LFM Change-over Module is available as an accessory for use in dual LFM applications.
产品参数
Standard 3u 19" rack for mounting in 19" cabinet. Optionalenclosure P7030 available for free standing use.
FRONT PANEL
Fitted with:-
illuminated push-button switches for display of measured variables; differential pressure (mmH2O), absolute exit pressure (mbar), and exit temperature.
illuminated push-button switches for display of computed results: volume flow rate (litres/sec), volume flow rate corrected to standard conditions (litres/sec), and mass flow rate (g/s).
Note: The standard conditions referred to are pressure of 1 atmosphere (1013.08 mbar) and temperature of 15ºC.
Four digit seven segment numeric display, 14.2 mm high. Minus sign, segmented display of engineering units. Updated every 250ms approximately.
Autoranging where appropriate.
illuminated push-button switches for selection of LFM.
Illuminated push-button switch for power on/off.
DISPLAY FULL SCALE RESOLUTION
Differential Pressure 0-300 mm H2O 0.5 mm
Absolute Pressure 0-3500 mbar 2 mbar
Temperature 0-100ºC 0.1ºC
产品简介
详细内容英国Cussons发动机空气质量流量计算机P7028产品介绍TheMassFlowComputerP7028isusedinconjunctionwithCussonsLaminarFlowMeters(LFM)forthemeasurementofairflowinautomotiveapplications
详细介绍
详细内容
英国Cussons发动机空气质量流量计算机P7028
产品介绍
The Mass Flow Computer P7028 is used in conjunction with Cussons Laminar Flow Meters (LFM) for the measurement of air flow in automotive applications.
The instrument uses two precision pressure transducers to measure the differential pressure across the laminar flow element (LFE), and absolute pressure upon discharge from the LFE, and a platinum resistance thermometer to measure the air temperature.
From these measurements a 16 bit microprocessor calculates:-
The volume flow rate at the prevailing temperature and pressure
The volume flow rate corrected to standard conditions (Temperature 15ºC; pressure 1013.08 mbar)
The mass flow rate
The microprocessor automatically corrects the flow rates to take account of changes in the viscosity of air with varying temperature.
The three primary measurements and the three calculated flow rates may be independently displayed in engineering units on a 4 digit LED display by means of six push button selection switches mounted on the instrument front panel.
An analogue output is provided to enable logging of either the mass flow rate or the corrected volume flow rate.
The instrument is designed for use with either one or two LFMs with the latter option enabling the following application to be achieved.
Where the air flow to be measured exceeds the range of available LFMs, a system using 2 LFMs in parallel, as illustrated in Fig. 1, can be used to solve the problem.
Where optimum resolution is required over a wide range of air flow rates, a system using selected LFMs in parallel, as illustrated by Fig. 2, can be used to produce an exceptionally large turn-down ratio. The instrument
provides for either manual or automatic change-over between the two LFMs.
For large engine applications involving two separate air intakes, individual LFMs can be used for each intake as illustrated by Fig. 3. Similarly, one P7028 instrument can be used in conjunction with two LFMs operating in adjacent test cells.
An LFM Change-over Module is available as an accessory for use in dual LFM applications.
产品参数
Standard 3u 19" rack for mounting in 19" cabinet. Optionalenclosure P7030 available for free standing use.
FRONT PANEL
Fitted with:-
illuminated push-button switches for display of measured variables; differential pressure (mmH2O), absolute exit pressure (mbar), and exit temperature.
illuminated push-button switches for display of computed results: volume flow rate (litres/sec), volume flow rate corrected to standard conditions (litres/sec), and mass flow rate (g/s).
Note: The standard conditions referred to are pressure of 1 atmosphere (1013.08 mbar) and temperature of 15ºC.
Four digit seven segment numeric display, 14.2 mm high. Minus sign, segmented display of engineering units. Updated every 250ms approximately.
Autoranging where appropriate.
illuminated push-button switches for selection of LFM.
Illuminated push-button switch for power on/off.
DISPLAY FULL SCALE RESOLUTION
Differential Pressure 0-300 mm H2O 0.5 mm
Absolute Pressure 0-3500 mbar 2 mbar
Temperature 0-100ºC 0.1ºC
更新时间:2024/4/19 11:52:42
标签:P7028英国Cussons发动机空气质量流量计算机
产品询价
留言框 | |
感兴趣的产品: | * |
您的单位: | * |
您的姓名: | * |
联系电话: | * |
详细地址: | |
常用邮箱: | |
您的任何要求、意见或建议: * |
|
验证码: | * |
上海非利加实业有限公司联系人:蒲经理
邮箱:2565589524@qq.com 邮编:
同类相关产品
相关文献
产品搜索
- 联系电话:400-006-7520
联系我们
- 公司名称:上海非利加实业有限公司
- 电话:400-006-7520
- Email:2565589524@qq.com
- 联系人:蒲经理
- 手机:18221374310
- QQ: 2565589524
- 公司地址:上海市浦东新区建韵路500号天纳商汇4座1715